Power Transformers
-
Power over Ethernet Transformer CND-tek EFD-021SG T with Wide Voltage Range and RoHS Compliant Materials
Product Overview Flyback PoE Transformers designed for Power over Ethernet applications. These transformers operate in condition mode with a wide input voltage range of 36V to 72V and support switching frequencies up to 250KHz. They feature Class B Insulation System and RoHS compliant tin-silver...
-
DC DC Transformer EP1322S 10 PoE Flyback Transformer RoHS Compliant Tin Silver Copper Terminations
Product OverviewDC/DC Transformer, a flyback transformer specifically designed for PoE applications. It features RoHS compliant tin-silver-copper over tin over nickel over phos bronze terminations, with other options available at an additional cost. The operating and storage temperature range is ...
-
xDSL transformer CND-tek EP13121P-10 with 410 microhenry inductance and 13.5 ohms maximum DCR rating
Product OverviewThe xDSL Transformer, specifically the EP13121P-10 model, is designed for xDSL applications. It features RoHS compliant tin-silver-copper over tin over nickel over phos bronze terminations, with other termination options available at an additional cost. This transformer operates ...
-
CND tek LTC04S 06 Push Pull Transformer Featuring 60mOhms DCR and 1 to 2.5 Turns Ratio for Electronic
Product OverviewThis document describes the LTC04S-06 Push-Pull Transformer, designed for operation in a wide temperature range from -40C to +125C. It features specific inductance, DCR, turns ratio, isolation voltage, and LL (leakage inductance) characteristics, making it suitable for various ...
-
Power over Ethernet flyback transformer model CND-tek EP475SG-10 featuring 37-57V input and IEEE 802.3at compliance
Product OverviewFlyback transformer designed for Power over Ethernet (PoE) applications. Meets IEEE 802.3at (PoE) standards and operates in condition mode with a 37-57V input. Features very low core power loss with operation frequencies up to 300KHz. Offers resistance to soldering heat with a ...
-
Surface mount planar transformer BOURNS PLN060-ER20A05S flyback converter with 60 watt power rating
Product Overview The PLN0xx-ER20 Series is a range of planar transformers designed for DC to DC conversion, offering power ratings from 60 to 71 watts. Utilizing a flyback converter topology, these transformers feature low leakage inductance and a low-profile, surface-mount design. They operate ...
-
Bel Fuse ST 2 120 Transformer Split Bobbin Construction with UL and CSA Certifications Class F Rated
Product Overview The Signal ST/DST Series Split Bobbin Transformers are specialty purpose and Class 2 transformers designed for high isolation and low capacitive coupling. Utilizing a dual cavity platform, these transformers offer rigid pin construction for easier board insertion and enhanced ...
-
Dual Cavity Split Bobbin Transformer with RoHS Compliance and Electrical Isolation Bel Fuse DST-7-36
Bel Fuse Signal ST / DST Series Split Bobbin Transformers Product Overview The Bel Fuse Signal ST and DST Series Split Bobbin Transformers are specialty purpose and Class 2 transformers designed for printed circuit board mounting. Utilizing a dual cavity platform, these transformers offer superior ...
-
power transformer Bel Fuse 241-7-28L with split bobbin construction UL recognized and chassis mount design
Signal 241-L Series Two-4-One Power Transformers Signal's 241-L Series Two-4-One Power Transformers are chassis mount transformers featuring a split bobbin construction that provides superior isolation and low capacitive coupling. These transformers are designed for various applications requiring ...
-
Dual primary 115 230 volt transformer Bel Fuse A41-43-10 with series or parallel secondary wiring options
Product Overview The Belfuse A41 Series All-4-One International Transformers are designed to provide high isolation, creepage, and clearance, ensuring compliance with international safety standards. These transformers offer lower cost and better performance, suitable for a wide range of applications ...
-
Signal ECO Series Transformer with Screw Clamp Terminals and Split Bobbin Design Bel Fuse ECO-105-24
Product Overview Signal's ECO Series EcoTran Standard Series Transformers are chassis mountable, designed with split bobbin construction for superior isolation and no exposed metallic surfaces. They feature touch-safe terminals to eliminate potential shock hazards. These transformers are compliant ...
-
step down multi tapped power isolating transformer Bel Fuse 68-4 designed for rectifying circuit applications
Product Overview The Belfuse DL Series Step Down Multi-Tapped Power Isolating Transformers are conservatively designed for high reliability and efficiency. Originally developed for powering rectifying circuits, these transformers are versatile and suitable for a wide range of applications. They are ...
